● SPRING TUNE-UP · FALL CHECK · DRAIN · AIRFLOW ●
Twice-yearly service that catches the failures that strand people in July - owner-operated by Tony and Jon Luke Ventresca.
Florida systems barely get a winter off. Maintenance has to keep up.
Routine AC maintenance keeps an Orlando system ahead of the heat - and that matters more here than in most markets, because Florida systems run 10–12 months a year against 4–5 in northern climates. Twice-yearly service catches the failures that strand people in July: neglected drains, weak capacitors, dirty coils, loose electrical connections. Father and Son is owner-operated by Tony and Jon Luke Ventresca.
AC maintenance in Orlando from Father and Son. Florida systems run 10-12 months a year - far more than northern markets - which is why we recommend twice-yearly maintenance (spring pre-cooling tune-up, fall system check). Our maintenance visit includes refrigerant subcool/superheat verification, capacitor microfarad reading, contactor inspection, evaporator and condenser coil cleaning, drain line treatment (algae prevention is critical in Florida humidity), and CFM airflow verification. Maintenance customers receive priority scheduling during business hours when availability allows. CAC1823678 licensed.
Two visits, timed to Florida's real seasons
Florida CAC1823678 LicensedCertified Air Conditioning Contractor, Class B. Verify on the Florida DBPR →
Tony in the trade since 1995 - 30+ yearsDiagnosing Florida capacitors, compressors, and refrigerant failures.
5.0 Google ratingFrom named Orlando customers.
Authorized Goodman dealerWith warranty labor handling included.
Synchrony financing availableOn repairs and replacements.
Northern AC systems coast for half the year. Yours doesn't - and the maintenance schedule has to reflect that.
10–12
Months of runtime a year
Northern AC systems coast for half the year. Yours doesn't. An Orlando system runs 10–12 months annually, which means the compressor cycles, the blower spins, and the condensate drain stays wet far longer than a system in a four-season climate. A once-a-year tune-up built for that northern pattern under-serves a system that barely gets a winter off.
90%+ & 130°F+
Summer humidity & attic heat
Humidity is the second reason the schedule changes here. Central Florida's summer humidity routinely sits above 90%, and a coil pulling that much moisture out of the air stays damp - ideal conditions for biological growth on the evaporator and algae in the drain line. Attic temperatures compound it: the air handler and ductwork running through an unconditioned Orlando attic sit in 130°F+ heat for months, which bakes insulation, stresses electrical connections, and pushes capacitors toward early failure. For homes near the coast, salt air adds galvanic corrosion to the condenser's aluminum fins and copper coil.
No off-season
Small faults only get worse
There's a compounding effect, too. Deferred maintenance accumulates - a slightly low charge makes the compressor work harder, a marginal capacitor strains the motor it starts, a partially clogged drain edges closer to a shutdown - and in a system running ten or more months a year, small problems don't get an off-season to sit quietly. They get worse. Catching them on a schedule is what keeps a minor adjustment from becoming a peak-season failure.
2×
Visits a year, spring & fall
So we recommend two visits, timed to Florida's real seasons rather than a generic calendar: a spring pre-cooling tune-up before the system carries the summer load, and a fall system check after the hardest months are behind it. Twice-yearly service also keeps you inside most manufacturers' maintenance requirements, which matters if you ever need to make a warranty claim. Some industry estimates put the share of avoidable emergency calls that routine maintenance can prevent as high as 95% - that figure is industry data, not a Father and Son measurement - but the principle is one Tony and Jon Luke see on the trucks every summer: the failures that strand people in July are usually the ones a spring visit would have caught.
A real maintenance visit is a measured inspection, not a quick filter swap. Each item below is checked against a specification, not a guess - the same comprehensive maintenance checklist we work through and document on every visit.
We connect gauges and compare measured subcooling and superheat against the manufacturer's target range for your equipment, which confirms the charge is correct rather than "topping off" a system that may have a leak.
Checked against a spec on every visit
If a visit turns up an active problem rather than routine wear, that's a different job - diagnosis and repair. You can see our AC repair diagnostic process for how we handle a system that's already failing.
A few maintenance items barely register in a northern climate but drive most of the avoidable breakdowns here.
This is the single most Florida-specific maintenance item we handle. The combination of cool condensate and warm, humid air grows algae and biofilm inside the condensate line, and once it backs up, the safety float switch shuts the system down - usually on the hottest afternoon of the year. Treating the line twice a year is cheap insurance against a summer no-cool call.
Most Orlando ductwork runs through an unconditioned attic that hits 130°F+ in summer. We inspect flex duct for UV and heat deterioration, check for disconnected boots at the registers, and look at the insulation jacket, because cooled air leaking into a superheated attic is both a comfort problem and an energy bill problem.
For customers in the more coastal-adjacent parts of our Central Florida service area, airborne salt corrodes the condenser's aluminum fins and copper lines, slowly choking heat rejection long before the unit fails outright. We clean and inspect for corrosion, check the fin condition, and flag protective coatings where they make sense so the outdoor unit keeps doing its job.
A pre-season check is the best protection a system can get before Florida's June-through-November storm season - confirming the unit is secure, the drain is clear, and the electrical connections are sound before a storm arrives. (A dedicated hurricane-prep HVAC guide is on the way.)
The simplest way to stay on a twice-yearly schedule is to put it on the calendar rather than trying to remember it each season.
The simplest way to stay on a twice-yearly schedule is to put it on the calendar rather than trying to remember it each season. Maintenance customers receive priority scheduling during business hours when availability allows - when something does go wrong, you move toward the front of the queue. We're finalizing how recurring maintenance is structured, and we'd rather tell you plainly where that stands than publish numbers we haven't confirmed.
If you'd like to lock in spring and fall visits, call (407) 929-3535 and we'll walk you through current options and pricing for your system. However we structure it, the work itself doesn't change - it's the full inspection above, performed or directly overseen by Tony or Jon Luke, twice a year.
Get ahead of the summer instead of waiting for the breakdown. Schedule AC maintenance with Father and Son or call (407) 929-3535 to book your spring pre-cooling tune-up or fall system check. Same-day diagnostics available during business hours.
